Okay, so I’ve been messing around with these “fly wheels” lately, specifically the 15-inch cruiser ones. Let me tell you, it’s been a bit of a journey, so I figured I’d share my experience.
Getting Started
First off, I got my hands on a set. I went with the 15-inch because, well, I wanted something that felt substantial, I guess and I liked the look. After getting them, the very first thing I did was just spin them in my hands. It felt pretty good.
The Build
Next, I had to figure out how to actually use these things. I used these tools:
- Some basic tools, screw driver.
- A few bolts.
- The instruction manual.
I followed the manual, I bolted everything together, which took a bit of time and patience, and several times I had to double-check that I hadn’t messed anything up.
Testing it Out
Finally, I was ready to test. I gave it a good, hard spin. It spun for a surprisingly long time! and that was pretty satisfying.
Final thoughts
So, that’s my little adventure with fly wheels 15 cruiser so far. I mounted, checked , bolted, and tested the fly wheels, It’s been a fun little project, and I’m excited to see what else I can do with them.
